1. What Are RF and RF Connectors?

Radio Frequency (RF)

Radio Frequency (RF) stands for electromagnetic radiation ranging from 300 KHz to 300 GHz, capable of free-space propagation. In electrical terms, RF refers to high-frequency alternating current (AC).

AC below 1,000 cycles per second counts as low-frequency current; AC exceeding 10,000 cycles per second falls into high-frequency current, where RF belongs.

RF Connectors

An RF connector is a passive interface component built for RF signal transmission. It acts as a core link connecting components, assemblies, and entire systems, enabling stable electrical and signal delivery.

In microwave circuits, these connectors connect or disconnect coaxial cables, microstrip circuits, and transfer RF signals smoothly. Normally, male plugs attach to cable ends, while female sockets mount on fixed equipment; they also link two RF cables directly.

2. Interface Types and Frequency Ranges

RF connectors are built for targeted frequency bands, with performance tied closely to interface design. Below are common types and their max operating frequencies:

High-frequency connectors (1.0mm, 1.35mm) suit millimeter-wave applications; low-frequency types (BNC, SMB) work for daily low-bandwidth uses.

3. Interface-End Connection Types

A connector’s connection mechanism defines its reliability, usability and application scenarios. Here are the most common types:

3.1 Threaded Connection

This is one of the most widely used, stable coupling methods. Male connectors carry internal threads, female ones carry external threads. It connects slowly but locks firmly, perfect for high-vibration environments. Common models: SMA, TNC, N, 7/16, 4.1/9.5. Applications: test equipment, military systems, telecom infrastructure.

3.2 Bayonet Connection

Designed for fast, secure mating via a rotating bayonet lock. It enables quick plug-and-unplug with stable locking. Common models: BNC, BNT, SHV, MHV, C series. Applications: test gear, military setups, frequent connection scenarios.

3.3 Push-On Connection

Features a simple push-in design, often with floating contacts for ultra-fast mating. Ideal for miniaturized, high-density setups. Common models: MMCX, MCX, SMP, SSMP, SMB. Applications: compact electronics, internal equipment cabling.

3.4 Slide-In Connection

Uses a sliding contact structure with slotted outer conductors, built for PCB mounting. Common models: BMA, D-SUB, 1.0/2.3. Applications: PCB-to-PCB connections, internal device interfaces.

3.5 Push-Lock (Push-In Self-Locking)


Combines fast push-on speed with auto-locking security, preventing accidental disconnection. Resists cable pull and fits high-density racks. Common models: QMA, QN, 1.0/2.3, 1.6/5.6. Applications: telecom, field installation, dense equipment setups.

4. Application-End Connection Types

RF connectors are grouped by their termination styles for cables, panels or PCBs, matching real assembly needs.

4.1 Cable Termination

Common coaxial cable termination methods: Crimping (fast, field-friendly cold-forming bond); Clamping (solder-free, fits semi-rigid cables); Soldering (stable electrical performance); Compression (gas-tight seal, easy field installation).

4.2 Panel Mounting


Common panel mounting options: Bulkhead Mount (through-panel sealed design); Flange Mount (rigid permanent mounting); Hermetically Sealed (harsh environment & vacuum use); Field-Replaceable (quick modular replacement).

4.3 PCB Mounting


Common PCB termination styles: Press-in (solderless, mass production friendly); Through-Hole Soldering (strong mechanical stability); Surface-Mount (SMT, miniaturized high-density assembly).

5. Classification of RF Connectors

5.1 By Characteristic Impedance

RF connectors follow two standard impedance values for coaxial system matching:

75 Ω: For low-frequency (DC ~ 3 GHz) uses like broadcast and cable TV systems.

50 Ω: Universal standard for high-frequency & microwave applications; all millimeter-wave connectors use 50 Ω.

Always match impedance to avoid signal reflection. 50Ω only: SMA, SMP, SSMP, millimeter-wave models; 75Ω only: F-type connectors; Dual impedance: N, BNC, TNC, MCX.

5.2 By Size and Form Factor

Large Size: 7/16, 4.3/10, 4.1/9.5 – for high-power base station & broadcast uses.

Medium Size: N, TNC, BNC – for test measurement and general interconnection.

Small Size: 3.5mm, 2.92mm, SMA – for high-frequency device cabling.

Ultra-Small Size: MMCX, SSMP – for compact devices like smartphones and IoT modules.

About INERGEK TECHNOLOGY CO., LTD

INERGEK focuses on R&D and manufacturing of high-performance RF coaxial cables, cable assemblies and connectors. With precision engineering, we lock in accurate 50Ω impedance and deliver reliable connectivity for industrial, telecom, test and aerospace RF systems.

We provide standard and customized RF solutions, built to tight tolerances for stable long-term performance in harsh operating environments.

Get in Touch With Us

www.inergek.com | [email protected] | +86 18971056957

INDUSTRIAL ENGINEERING & CONNECTIVITY

© 2026 INERGEK TECHNOLOGY CO., LTD. All rights reserved.